1.5 / 2 kW configuration
- Power
- 1,500 / 2,000 W
- Input
- AC 220 V ±10%, 50/60 Hz
- Scan width
- 300 mm / 11.8 in
- Fiber cable
- 10 m / 32.8 ft; extendable
- Cleaning head
- 1 kg / 2.2 lb
- System weight
- Approximately 180 kg / 397 lb
TY-HS1022
Water-cooled continuous cleaning
One shared series number, configured around two power bands, utility supply and scan width.
- 1.5-2 kW
- 220 V · 300 mm / 11.8 in · approximately 180 kg / 397 lb
- 3-6 kW
- 380 V · 500 mm / 19.7 in · approximately 250 kg / 551 lb
Two water-cooled configurations
TY-HS1022 Water-Cooled Continuous Laser Cleaning Series
The TY-HS1022 water-cooled continuous laser cleaning series has two configuration groups: 1,500 or 2,000 W, and 3,000 or 6,000 W. Compare their electrical supply, scan width, head weight and installation needs against the same surface-cleaning task.
Listed power range1.5-6kW
Series configurations2options
Scan width300 / 500mm
Whole-machine warranty: 2 years · Final price and delivery timing depend on power, electrical supply, fiber length, safety, extraction and integration scope.
Specifications
TY-HS1022 technical data
Series architecture
- Series
- TY-HS1022
- Listed configurations
- 1.5 / 2 kW water-cooled / 3 / 6 kW water-cooled
- Laser source
- Continuous fiber laser
- Operation
- Handheld
- Control
- Touchscreen
- Machine mobility
- Caster wheels
Laser and cleaning range
- Listed laser power
- 1,500 / 2,000 / 3,000 / 6,000 W
- Scan width
- 300 or 500 mm / 11.8 or 19.7 in, configuration dependent
- Cooling method
- Water cooling
Utilities and handling
- Input power
- AC 220 V ±10%, 50/60 Hz for 1.5 / 2 kW; AC 380 V ±10%, 50/60 Hz for 3 / 6 kW
- Fiber cable length
- 10 m / 32.8 ft; extension available by configuration
- Cleaning-head weight
- 1 or 2 kg / 2.2 or 4.4 lb, configuration dependent
- Listed system weight
- Approximately 180 or 250 kg / 397 or 551 lb, configuration dependent
- Whole-machine warranty
- 2 years
Two power bands under one TY-HS1022 series number
Values below follow the listed configuration records. Final power, utility, cooling and supply scope are confirmed in the project quotation.
3 / 6 kW configuration
- Power
- 3,000 / 6,000 W
- Input
- AC 380 V ±10%, 50/60 Hz
- Scan width
- 500 mm / 19.7 in
- Fiber cable
- 10 m / 32.8 ft; extendable
- Cleaning head
- 2 kg / 4.4 lb
- System weight
- Approximately 250 kg / 551 lb
Match power, scan width and utilities to the cleaning task
Two power bands under one series
Compare the 1.5 / 2 kW and 3 / 6 kW equipment bands without treating the shared TY-HS1022 series number as separate product models.
Water-cooled architecture
Both listed configurations use water cooling and a continuous fiber laser source for industrial cleaning projects.
300 or 500 mm scan width
The listed scan width increases with the selected configuration, supporting different workpiece sizes and cleaning-area requirements.
Handheld process access
A 10 m fiber cable and handheld cleaning head support access around steel structures, large components and installed equipment.
Configuration-matched utilities
The lower-power band is listed for 220 V input, while the 3 / 6 kW band is listed for 380 V input; the project utility plan is confirmed before quotation.
Selected from the workpiece first
Power, scan width and project scope are confirmed after reviewing the substrate, surface layer, cleaning area, access and acceptance sample.
From surface review to installation planning
A typical sequence for matching the system to the substrate, surface layer, access conditions and production duty.
- 01
Base material and surface-layer review
- 02
Rust, oxide, paint or coating definition
- 03
Cleaning area and access check
- 04
Sample and acceptance-standard planning
- 05
Power-band and scan-width selection
- 06
Electrical supply and cooling review
- 07
Fiber length, safety and extraction scope
- 08
Installation and commissioning plan
Compare pulsed, air-cooled and automated paths
Pulsed laser cleaning
TY-QX1019
Compare eight pulsed configurations for mobile, workshop and production cleaning tasks.
Air-cooled continuous cleaningTY-HS1023
Review the air-cooled continuous-wave series for mobile industrial cleaning tasks.
Integrated processing cellsRobot automation systems
Explore robot and handling systems for application-specific automated processing projects.
Explore industry solutions
Browse our industry solutions and discuss the equipment, fixtures and process requirements for your application.
View all industry solutionsCompare the two continuous cleaning groups
Use the four listed power options
The lower group offers 1,500 or 2,000 W and the higher group offers 3,000 or 6,000 W. These are specified choices, not confirmation of every intermediate rating. Open the relevant detail page to review the complete package.
Compare utilities and handling alongside power
The lower group lists 220 V input, 300 mm scan width and a 1 kg head; the higher group lists 380 V, 500 mm and a 2 kg head. Both use water cooling and list ten-metre fiber, with extensions reviewed by configuration.
Request comparable proposals for the actual surface
Give each proposed configuration the same substrate, layer, geometry and acceptance requirements. Include working access, operating schedule, cooling, extraction and installation scope so price and expected output refer to a comparable cleaning task.
Machine selection questions
How should I choose between the two power groups?
Compare the cleaning result required on the real surface, then review available supply, head handling, machine position and intended operating schedule. The higher rating alone does not establish the better configuration.
Is this a pulsed laser cleaning series?
No. TY-HS1022 uses a continuous fiber laser and water cooling. The TY-QX1019 series offers pulsed configurations for a separate process comparison.
Are powers between 3000 and 6000 W available?
The current series lists 1,500, 2,000, 3,000 and 6,000 W. Intermediate ratings are not established by the group names and should not be assumed.
What utilities differ between the groups?
The 1,500/2,000 W group lists AC 220 V and the 3,000/6,000 W group lists AC 380 V, both at 50/60 Hz with water cooling. Confirm electrical load and cooling installation for the selected package.
What should be included in a quotation request?
Provide substrate and surface-layer information, cleaning area and geometry, required finish and operating schedule. Include available utilities, working reach and the required extraction, safeguarding, delivery and commissioning scope.
Request a quote
Tell us the part. We will tell you the machine.
Price depends on output power, electrical supply, scan width, fiber length, safety package, extraction, automation interface and installation scope.
- Phone+86 153 6281 4831
- Emailsales02@taiyilaser.com
- WhatsApp+86 153 6281 4831